Learn To Make Pegs For Your Hats

Let your imagination run free and use your skills to make your very own hat pegs! Today we will give you some simple ideas on how to make pegs for your hats.
Learn how to make hooks for your hats

Today we are going to tell you how to make your own hooks for your hats. Of course , you can also use them for your jackets, wallets or umbrellas, or for something completely different you may need to hang up. It is difficult to find pegs in modern homes these days. However, they are very useful, in addition to being great decorations  for any home.

With a little imagination, you can make pegs for your hats in any style you want. For example, you can make them in modern style, or in rustic style. Make them in the style that best suits your house. The best part is that you do not have to spend a lot of money on it, because you can use many different materials you already have at home!

How to make pegs for your hats with bottles

How to make pegs for your hats
If you are looking for a way to reuse the glass bottles you have collected at home, you can choose this interesting project. It’s a fun way to hang your hats!

The glass bottles you have collected at home are very useful for making beautiful pegs. You can use them to hang hats and other things.

What you need

  • 4 or 5 glass bottles. (You can use as many as you want, and mix and match shapes and styles according to your design.)
  • 1 flat rectangular wooden plank, or glass or acrylic
  • A thin cotton thread
  • Alcohol
  • A lighter
  • A container of water
  • A glue chair

This is what you do

  • First, tie the thread around a bottle, about 2 inches below the neck. Make sure the rope is only tied around once and is well adjusted.
  • Moisten the rope with alcohol so that it is soaked.
  • Light the wire with the lighter. You may need to try several times if it goes out too quickly.
  • After about one minute of continuous flame, and before extinguishing, dip the bottle into the water tank. You should hear a click, indicating that the glass was cracked. This means that the bottle is separated along the thread.
  • Repeat the process with the rest of the bottles. Measure them to make sure they are the same size.
  • Mark the areas where you want to place the bottlenecks in your plate made of wood, glass or acrylic.
  • Then apply a little glue on the cut edge of the bottles.
  • Then place the bottles in the mark you made on the plate with glue.
  • Finally, you can hang it on the wall, using nails or screws.

Hooks for your wooden hats and forks

How to make pegs for your hats
Do you have old forks you no longer use? Turn them into a peg to hang your hats on! You just have to bend them and turn them into hooks.

This is an easy and cheap way to make hooks for the hats. All you have to do is bend the forks and fasten them to a board or a wall.

What you need

  • Old forks
  • Pliers
  • A drill with a small metal drill
  • A wooden board / plank

This is what you do

  • First, place the fork on the wooden board, and secure it tightly with tape or elastic.
  • Then drill a small hole in the handle of the fork.
  • Take the fork and bend it upwards with the pliers. Do it from the middle of it.
  • You can also bend some of the fork teeth, to create a funky design of your choice.
  • Finally, attach the fork to the board, by nailing through the hole you previously drilled.
  • You can also nail the forks directly to the wall.

Rustic jacket pegs

How to make pegs for your hats
In general, rustic-style jacket hangers are ideal for decorating rooms that have the same theme. They are also a great addition to vintage decorations.

What you need

  • Metal hooks (available at your local hardware store)
  • Wooden planks / plates
  • Nails and a hammer
  • Paint

How to make hooks for your hats

  • First you need to cut several rectangular pieces of wood.
  • Then paint them to your liking.
  • Make a pattern you like and nail them in place.
  • Then you can nail or screw the metal hooks on the plate you made.
  • Finally, you can nail the jackets directly to the wall, by making holes in the upper corners, or you can nail hooks on the back.

Have you ever tried to make pegs for your hats? As you can see, they are very easy to make, and you can use any materials you have at home!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button